Bore Upgrading To Vixion

[rowan]

147 only for gps a lot of error but runnin on stock carby owner is happy already

 

[Moses]

subscribing!

 

[milu]

my first upgrade was vixion kit with stock carb and 22/19 valves .. that was the time i met traxx and kimredbull mamaw mech same time riders!
if you jst do it right here the result :

I'm just curious sir Rowan, does 22/19 valves fits our stock engine? or Valve pocketed needed? TIA

 

[Francisco N. Maristela]

I'm just curious sir Rowan, does 22/19 valves fits our stock engine? or Valve pocketed needed? TIA

watch mode

 

[john-locke]

An answer here please !!!
http://www.yamahat135.com/threads/piston-ring-problem.15016/

 

[elmer o saguisa]

sir pls help me,,,i already install vixion kit,vixion cams,vixion valve spring,brt rcdi,open pipe,keihin pe 28mm and d valve clearance set is same as stock,,my problem is my jettings , any one can help me what main jet and pilot jet can i use in this set?

 

[ianghol]

sir pls help me,,,i already install vixion kit,vixion cams,vixion valve spring,brt rcdi,open pipe,keihin pe 28mm and d valve clearance set is same as stock,,my problem is my jettings , any one can help me what main jet and pilot jet can i use in this set?

pm sir traxx about jetting..
he also sell jets for carbs

 

[ianghol]

I'm just curious sir Rowan, does 22/19 valves fits our stock engine? or Valve pocketed needed? TIA

sir rowan installed vixion kit in the video..
pocketed piston to accommodate the bigger valves size..

 

[botsok]

sir pls help me,,,i already install vixion kit,vixion cams,vixion valve spring,brt rcdi,open pipe,keihin pe 28mm and d valve clearance set is same as stock,,my problem is my jettings , any one can help me what main jet and pilot jet can i use in this set?

try this thread..
http://www.yamahat135.com/threads/big-carb-jettings-jet-sizes-recommendation-for-yamaha-t135.2584/