Need Help..how To Change The Auxiliary Light Stator To Battery Connection

[mars allan sanidad]

study and watch mode. thanks so much for the inputs. more power

 

[ronald031803]

Use SPDT relay bro. Heres the diagram. Relay symbol should be like this.( 87 & 87A not connected).
View attachment 22295
View attachment 22294

bro thon,why do you use diode???

 

[thon]

bro thon,why do you use diode???

This diode will protect other electronics components from back EMF (High voltage pulse) generated by relay coil when relay supply switch off. If no other electronic components added in parallel with relay coil then diode can be omitted in the circuit.But for me I always put diode across relay coils. 1n4001 diode cost only 1 peso or less.

 

[Sidro]

What kind of relay is this sir...is this the same that sir thon were saying?or do i have to use two relays? Can you show me a simple diagram please?TIA

its just a standard relay used by four wheel vehicles, you can buy it any automobile shops, even at ace hardware or handy man.

 

[Erowbone]

Use SPDT relay bro. Heres the diagram. Relay symbol should be like this.( 87 & 87A not connected).
View attachment 22295
View attachment 22294

Sir, does this means that if the yellow wire is not conected with the rectifier it will automatically fast charge?how it is possible

 

[thon]

Sir, does this means that if the yellow wire is not conected with the rectifier it will automatically fast charge?how it is possible

If yellow wire is not connected the regulator will not be able to shunt excess current from stator to stator winding via yellow wire when regulator set voltage exceeded.
Take note our Mc use shunt type regulator.

 

[m.bolado14]

this thread is for the one like me who has a broken startor right now!!! but i cant understand the diagram i want this to my sniper cause usually this is the problem of the sniper the mechanic of the yamaha(imus) said to me stator problem!!! plss help me about this problem thx so much!!!!

 

[m.bolado14]

or any shop that can do this thing!!! thx!!!

 

[suiluj]

using HID and Led Auxillary light with out low bat.

 

[suiluj]

Here another way of converting your Mc to battery operated.
View attachment 22293

pwede naman bunutin ang wire from socket instead of cutting it... so if you want to restore your original settings of your electrical you can plug it back again instead of soldering or connecting it with electrical tape. HTH

 

[thon]

pwede naman bunutin ang wire from socket instead of cutting it... so if you want to restore your original settings of your electrical you can plug it back again instead of soldering or connecting it with electrical tape. HTH

Its my own way of doing battery operated on my MC sir, just sharing it to others. I can reconnect it back by using soldering iron & shrinkable tube.

Reminder: YOU ARE ON ENGLISH SPEAKING SECTION, Please post in ENGLISH!​

​

 

[mars allan sanidad]

where will you the diode sir thon?

 

[bhek_21]

My own way of modifying to battery operated the auxiliary lights without neglecting the stator power supply for stock headlight bulb.. you just need one relay..

 

[mars allan sanidad]

waiting idol...

 

[bhek_21]

waiting idol...

^
^
^
here it is bro.. I hope this helps..
By the way, use the 12V relay.. I usually use BOSCH.. it only costs 150php + buy the relay socket to make your wiring clean, organized and safe..

 

[bhek_21]

By the way, hazzard light DIY diagram is already included there..

 

[mars allan sanidad]

thanks bro study mode..

 

[jetsniper]

sir traxxx... those this diagram applies to the sniper mx models? TIA

 

[edfaith]

do sniper classic and SMX has the same wiring color coding? i want to try this on my smx

 

[bhek_21]

do sniper classic and SMX has the same wiring color coding? i want to try this on my smx

Almost the same sir.. you can try it..