T135 Lighting System...

[superturbocompound]

i just went through the wiring diagram of the bike...reason being my lights are dim...i'm not clear on the electrical systems...
1) the light only goes on when the engine is on A) is it because the lighting system runs on ac?
B)how can it runs on ac if its unregulated, if the engine revs surely the bulb will blow or
C)if the lighting runs on ac,does the lighting system taps from one of the 3 phases?
D) judging by the widing looks like the charging coil runs 3 phase?am i right?
2)does the light run on dc? if yes how does it do it, the brightness of the light is directly based on engine speed

 

[jangbest]

HI Bro Our MC lighting was on stator driven, that's why our headlight bright when you revs the throttle, and light was not lit when you turn on the ignition, our battery tend to supply other electrical parts of out MC, CDI, Starter and Horn, if you want to you can convert you mc lighting from stator driven to Battery operated, but you need to replace all your lighting to LED, head light bulb, part light , signal light, tail light, why because lighting bulb ha sit higher wattage your battery will drain too fast if you will not change to LED. hope it helps. ride safe ...

 

[superturbocompound]

so as it turns out that our bike headlights are runing ac...