How To Know If Starter Motor Is Busted

sniper_sierra · Jul 11, 2016

Help plss. I cant use my push start. Just heard a tik tik sound near the starter motor when i tried to push start. Changed battery still wont start, what seems to be the problem is there a way to test my starter motor or is there any problem? Rectifier or regulator maybe? Tnx for the response.

sniper135lc · Jul 11, 2016

i think you brush is almost worn out.
you may removed the carbon brush and replace it. sometimes the rotor contact may burnt and this may not be use anymore to try to replace it. use air blow to spit off all grinded carbon deposits inside.

hope it will help.

sniper_sierra · Jul 11, 2016

sniper135lc said:
i think you brush is almost worn out.
you may removed the carbon brush and replace it. sometimes the rotor contact may burnt and this may not be use anymore to try to replace it. use air blow to spit off all grinded carbon deposits inside.

hope it will help.

Thnx po master do i need to disassemble the whole starter motor? Sori i dnt have idea if what is the carbon brush? Is that easy to remove or i will have to bring my bike to shop? Tnx again.

julius b. flaviano · Jul 11, 2016

consult to your trusted mechanic or electrician,it easy but need patience to do it bro

sniper135lc · Jul 12, 2016

yes it is very easy to removed there was two bolts on the magneto side at the upper portion. just removed the two bolts from where is the starter is and removed the red wire and pull it all out and check the carbon brush on the red wire.

if you don't have any idea just bring it to a certified mechanic.

you may test the motor by connecting it directly to the battery.

sniper_sierra · Jul 12, 2016

Thnks s guys s infrmatve response, might as well dlhin ko n lng s mecganic, at least n ndgdgan knowledge hehe. Tnx a lot.

sniper135lc · Jul 13, 2016